设置 指南
通过分步教程，快速搭建你的 IRL 直播。从基础 OBS 设置到高级编码器配置，一应俱全。
SRTLA Bonding Explained: Stream IRL Without Dropping
What SRTLA bonding is, how it holds your IRL stream together across multiple modems, and why a custom optimized relay beats the basic open source version.
The Best IRL Streaming Setup for Twitch and Kick in 2026
A complete, reliable IRL streaming setup for Twitch and Kick: phone or encoder, SRTLA bonding, a relay, your own OBS, and NOALBS scene switching, explained end to end.
How to IRL Stream Without a PC at Home
Every other setup assumes a PC running OBS while you are out. If you do not have one, here is the path that does the compositing in the cloud instead.
How to Multistream to Twitch, Kick and YouTube at Once
Multistreaming an IRL feed comes down to which machine makes the copies: your own OBS at home, or a compositor in the cloud. What each one costs you.
SRT Latency Settings for IRL Streaming: What to Set and Why
What the SRT latency number actually does, why 2000 to 3000 ms is the right starting point for cellular and bonded rigs, how to read freezes vs bitrate drops, and why a lower number rarely makes your stream feel faster.
SRTLA vs RTMP for IRL Streaming: Which Protocol to Use
How SRTLA, SRT, and RTMP differ for IRL streaming: recovery, bonding, latency, and when each one is actually the right call.
NOALBS 场景切换
根据码率自动切换场景。在连接质量变化时于 LIVE、LOW 和 BRB 场景之间切换。
Automatic Scene Switching with IRLControl (OBS Setup)
Connect IRLControl to OBS in three steps, point its scene switcher at your relay, and let OBS move to a low-bitrate or BRB scene by itself when your signal drops.
How to Keep Your IRL Stream Live When the Signal Drops
A field tested setup that stops your Twitch or Kick stream from ending when phone signal dies: SRTLA bonding, the relay as a source in your own OBS, and NOALBS auto scene switching.
How to Stop Your Stream From Ending on Twitch and Kick
Why Twitch and Kick end an IRL broadcast when your connection drops, and the setup that keeps the session alive: your own OBS broadcasting through a relay with NOALBS.
Why Mobile Signal Gets Bad While You Stream (and How to Fix It)
The real reasons cellular signal drops during an IRL stream: congestion, tower handoffs, crowds, and weak uploads, plus the setup that keeps you live anyway.
硬件编码器
配置 Belabox、LiveU Solo 和 IRLBox。使用你的中继端点搭建 SRT 和 SRTLA 直播。
How to Connect a LiveU Solo Pro to Your Relay over SRT
Set up an SRT custom destination for a LiveU Solo Pro, pick the right latency, and use HEVC to get more picture out of the same bonded uplink.
How to Connect an IRLBox to Your Relay
Send an IRLBox feed to an SRT or RTMP relay endpoint, get it into your own OBS, and understand where IRLBox's own RIST bonding fits.
How to Connect Belabox to Your Relay (with Remote Control)
Connect a Belabox to an SRTLA relay step by step, and remote control the box while you are live. The custom remote control most providers cannot offer.
How to Connect LiveU Solo and Solo Pro to Your Relay
Connect a LiveU Solo (RTMP) or Solo Pro (SRT) to an IRLServer relay. LiveU bonds with its own LRT layer, then sends a single stream to your relay and OBS.
How to Stream from a DJI Osmo Pocket to Your Relay over RTMP
Send a DJI Osmo Pocket 3 or Pocket 4 straight to an RTMP relay endpoint using the DJI Mimo app, then pull the feed into your own OBS.
移动直播应用
Moblin、IRL Pro 和 Larix Broadcaster 的搭建指南,配合 SRTLA 聚合以实现 iOS 和 Android 上的可靠移动直播。
How to Connect IRL Pro to Your Relay (Android SRTLA Setup)
Point IRL Pro on Android at an SRTLA relay step by step: protocol, server, port, and stream id, plus bonding multiple connections for a stable IRL stream.
How to Connect Moblin to Your Relay (iPhone SRTLA Setup)
Point Moblin on iPhone at an SRTLA relay step by step: protocol, server, port, and stream id, plus bonding multiple connections for a stable IRL stream.
How to Go Live IRL From Your Android Phone in 2026
Everything you need to IRL stream from Android: the right app (IRL Pro), bonded connections, a relay, and your own OBS, so your stream holds when you move.
How to Go Live IRL From Your iPhone in 2026
Everything you need to IRL stream from an iPhone: the right app (Moblin), bonded connections, a relay, and your own OBS, so your stream holds when you move.
How to Use a DJI Camera with Moblin for Bonded IRL Streaming
Pair a DJI Osmo Pocket or Osmo Action to Moblin over Bluetooth, let Moblin receive it on its own RTMP server, and send the result to an SRTLA relay so the feed bonds across cellular and WiFi.
需要更多帮助？